We here at FFD are now introducing our custom line for
Classic Vehicles. Each kit is custom for each
customer, ensuring proper cooling for each specific
vehicle. We do not have 1 kit to cool all Classic
Cars, efficient cooling doesn't work that way.
Universal kits are not the way to go when you want to
properly and efficiently cool your vehicle. Each
individual vehicle is unique, from engine size, to
modifications, to gear ratios, to outside temperature,
altitude etc. We take every aspect into
consideration when putting together a system to cool a
vehicles needs.
We use the most efficient fan set up that will not
burden your electrical system like some other e-fans on
the market. We know that older vehicles do not
have the best electrical systems. Yet, other
companies don't take that into consideration and sell
products that draw over 30 amps, which is ridiculous. We
will provide you with our best possible cooling fan at
the lowest possible amp draw, most will come in at
around 10 amps for the entire set up (depending on your
specific vehicle). We take all factors into
the designing of our kits and the electrical system will
not be overlooked when we put together a kit for you and
we will bring you up to date in cooling with our
efficient technology.
Your vehicle will also be rid of the heavy factory fan.
By removing the factory fan you are taking over 30
pounds of weight off of your front end. Our fans
are some of the most light weight fans on the market
because of our Nylaglass Torch Red Cages and
Blades. Our blades are precision pitched are
fully balanced with an "S" curve to insure
minimal noise and a long life of cool CYCLONE blowing
operation.
Also by removing the weight of the factory fan you
are now relieving stress. The early
vehicles out there use a factory fan that gets attached
directly to the engine, therefore every second your
engine is running it is spinning the fan, whether it be driving
or idling. Our systems are designed to come on
only when needed and, for most vehicles, will only run
for about 2 minutes to bring the temp down. Yes,
they are that good.
And finally by removing the weight of the factory fan
you have just freed up almost 30-40hp on some of
the older vehicles. Being how the fan is attached
directly to the engine, the power to spin those 30
pounds is coming directly from the engine. By
removing the factory fan, the engine will now have all
that power back, adding 30-40HP to what you
had before.
Once you remove your factory fan, not only will your
engine be happy, but your water pump
will thank you too as almost all stress is relieved and
water pump failure will be a non issue after the
conversion. And those of you who are still running
the factory fan know how many times you have had to
replace your water pump because of the stress that fan
put on it. With our set up, those days will
virtually be over.
Some vehicles will require a semi shroud system, we
have designed our shroud systems so that only enough of
the radiator is covered and not completely blocked.
By designing them this way our kits will provide maximum
cooling and maximum fan efficiency but they will not
block all the airflow that occurs during highway
speed driving and will not create any high pressure
spots. All of our 100% aluminum shrouds are
hand formed and TIG welded specifically for each
customer's vehicle.
Each system will also be fully adjustable as far as
temperature settings. Our thermostatic temperature
control module will allow you to dial in the temperature
you want your fans to turn on at with a simple twist of
the tuning tool we provide with our systems. You
will have full control of the temperature at which the
fans will turn on.
Weekend Racers, simply use our tuning tool and dial
the temp in at around 160 for a cooler running engine and
a cooler running engine means a faster quarter mile time.
A cooler running engine will have colder air and colder air
is denser, meaning you get more air in each combustion
cycle. More air equals more power.
MPG Freaks, simply use our tuning tool and dial the
temp in between 200-210. Hotter running
engine is a more efficient running engine, and a more
efficient running engine means better fuel consumption.
We've got you covered in every direction with our
carefully thought out and designed systems. You
won't be getting a kit that we just pull off of the shelf
and box up, you'll be getting a custom set up made
specifically for YOUR vehicles needs.
If you want to cool your classic baby the right way
contact us and include the following information:
Year, Make, Model
Engine Size
With or Without A/C
List all Modifications
Rear End Gearing
Zip Code
After we receive this information our technicians will go
to work, calculate and determine what the best
and most efficient way is to go about cooling your classic
vehicle. Some other information may be required, as
we already stated, each customer's vehicle is unique.
And of course our Electric Fans come with our Lifetime
Warranty.
All of our kits come with installation
instructions.
FOR DETAILS ON IF WE HAVE A CUSTOM
KIT FOR YOU, CONTACT US.
PLEASE BEAR WITH US AS WE ARE CURRENTLY REVAMPING OUR
WEBSITE.